Question

我正在努力寻找从坐标列表中删除不需要的目标的最佳方法。我的坐标（Ra，Dec）是使用astropy.coordinates.SkyCoord形成的，但是我有大量不可观察的目标，这些目标的赤纬太低，所以我想做的是对我的列表进行排序并删除所有目标例如，偏角低于-10度（因为我的望远镜位于北半球）。

这是我生成列表的代码行，为简化而调用radecs，得到Ra＆amp;十二月从天球坐标。

radecs = astropy.coordinates.SkyCoord(ra=phi*u.rad, dec=(0.5*np.pi - theta)*u.rad)

这是我在Python中输出坐标列表的示例。

<SkyCoord (ICRS): (ra, dec) in deg
    [(45.0, 60.0), (135.0, 45.0), (225.0, 25.0), ...,
    (135.0, 55.0), (225.0, 70.0), (315.0, -20.0)]>

Answer 1

我将简单说明如何在某些仲裁坐标上使用带有布尔掩码的numpy索引：

from astropy.coordinates import SkyCoord
import astropy.units as u
import numpy as np
phi = np.linspace(0,2*np.pi,20)
theta = np.linspace(0, np.pi, 20)
radecs = SkyCoord(ra=phi*u.rad, dec=(0.5*np.pi - theta)*u.rad)
radecs

给我radecs：

<SkyCoord (ICRS): (ra, dec) in deg
    [(0.0, 90.0), (18.94736842, 80.52631579), (37.89473684, 71.05263158),
     (56.84210526, 61.57894737), (75.78947368, 52.10526316),
     (94.73684211, 42.63157895), (113.68421053, 33.15789474),
     (132.63157895, 23.68421053), (151.57894737, 14.21052632),
     (170.52631579, 4.73684211), (189.47368421, -4.73684211),
     (208.42105263, -14.21052632), (227.36842105, -23.68421053),
     (246.31578947, -33.15789474), (265.26315789, -42.63157895),
     (284.21052632, -52.10526316), (303.15789474, -61.57894737),
     (322.10526316, -71.05263158), (341.05263158, -80.52631579),
     (0.0, -90.0)]>

获取您dec的{{1}}（拒绝），您可以访问该属性：

radecs

因此我们可以通过创建遮罩来访问偏差超过radecs.dec [90, 80.526316, 71.052632, 61.578947, 52.105263, 42.631579, 33.157895, 23.684211, 14.210526, 4.7368421, −4.7368421, −14.210526, −23.684211, −33.157895, −42.631579, −52.105263, −61.578947, −71.052632, −80.526316, −90]度的所有目标：

-10

然后索引满足此掩码的所有目标：

radecs.dec > - 10 * u.degree

给我以下radecs2 = radecs[radecs.dec > - 10 * u.degree]：

radecs2

基本上你所做的就是最后一步（<SkyCoord (ICRS): (ra, dec) in deg [(0.0, 90.0), (18.94736842, 80.52631579), (37.89473684, 71.05263158), (56.84210526, 61.57894737), (75.78947368, 52.10526316), (94.73684211, 42.63157895), (113.68421053, 33.15789474), (132.63157895, 23.68421053), (151.57894737, 14.21052632), (170.52631579, 4.73684211), (189.47368421, -4.73684211)]>），所有其他步骤只是解释性的。

如何对可观察坐标列表进行排序？

1 个答案: