Question

我正在使用Xilinx Vivado在VHDL上处理类似MIPS的CPU。我的BranchControl模块有一个组件，如下所示：

library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;

entity BranchControl is
    Port ( PL : in STD_LOGIC;
           BC : in STD_LOGIC_VECTOR(3 downto 0);
           PC : in STD_LOGIC_VECTOR (31 downto 0);
           AD : in STD_LOGIC_VECTOR (31 downto 0);
           Flags : in STD_LOGIC_VECTOR(3 downto 0);
           PCLoad : out STD_LOGIC;
           PCValue : out STD_LOGIC_VECTOR (31 downto 0));
end BranchControl;

architecture Behavioral of branchcontrol is

signal Z,N,P,C,V, T: std_logic;

begin

Z <= Flags(3);        -- zero flag
N <= Flags(2);        -- negative flag
P <= not N and not Z; -- positive flag
C <= FLags(1);        -- carry flag
V <= Flags(0);        -- overflow flag

T <= 
    '1' when (PL = '1') and (BC = "0000") and (Flags = "XXXX") else -- B
    '1' when (PL = '1') and (BC = "0010") and (Flags = "1XXX") else -- BEQ
    '1' when (PL = '1') and (BC = "0011") and (Flags = "0XXX") else -- BNE
    '1' when (PL = '1') and (BC = "0100") and (Flags = "00XX") else -- BGT
    '1' when (PL = '1') and (BC = "0101") and (Flags = "11XX") else -- BGE
    '1' when (PL = '1') and (BC = "0110") and (Flags = "01XX") else -- BLT
    '1' when (PL = '1') and (BC = "0111") and (Flags = "11XX") else -- BLE
    '0';

with T select
PCValue <= PC+AD when '1',
           PC when others;
PCLoad <= T;

end Behavioral;

我正在编写一个模拟来测试BranchControl组件，并确保它按照我的意图工作。这是我的模拟：

library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;

entity SimulBranchControl is
end SimulBranchControl;

architecture Behavioral of SimulBranchControl is

component BranchControl is
    Port ( PL : in STD_LOGIC;
           BC : in STD_LOGIC_VECTOR( 3 downto 0);
           PC : in STD_LOGIC_VECTOR (31 downto 0);
           AD : in STD_LOGIC_VECTOR (31 downto 0);
           Flags : in STD_LOGIC_VECTOR(3 downto 0);
           PCLoad : out STD_LOGIC;
           PCValue : out STD_LOGIC_VECTOR (31 downto 0));
end component;

signal iPL : STD_LOGIC;
signal iBC : STD_LOGIC_VECTOR(3 downto 0);
signal iPC : STD_LOGIC_VECTOR(31 downto 0);
signal iAD : STD_LOGIC_VECTOR(31 downto 0);
signal iFlags : STD_LOGIC_VECTOR(3 downto 0);

signal clock : std_logic := '0';

begin

    process
    begin
        wait for 50 ns;
        clock <= not clock;
    end process;

    process
    begin
        wait until clock'event and clock='0';
        iPL<='1'; iBC<="0010"; iPC<=x"00000000"; iAD<=x"00000001"; iFlags<="0000";

    end process;

BC0: BranchControl port map(iPL=>PL, iBC=>BC, iPC=>PC, iAD=>AD, iFlags=>Flags);

end Behavioral;

出于某种原因，当我尝试在Vivado中运行模拟时，我在精化步骤中遇到一组错误：

INFO: [VRFC 10-163] Analyzing VHDL file "/home/meurer/src/acomp/L02/Project2/Project2.srcs/sim_1/new/BranchControl.vhd" into library xil_defaultlib
INFO: [VRFC 10-307] analyzing entity BranchControl
INFO: [VRFC 10-163] Analyzing VHDL file "/home/meurer/src/acomp/L02/Project2/Project2.srcs/sim_1/new/SimulBranchControl.vhd" into library xil_defaultlib
INFO: [VRFC 10-307] analyzing entity SimulBranchControl
ERROR: [VRFC 10-719] formal port/generic <ipl> is not declared in <branchcontrol> [/home/meurer/src/acomp/L02/Project2/Project2.srcs/sim_1/new/SimulBranchControl.vhd:43]
ERROR: [VRFC 10-704] formal pl has no actual or default value [/home/meurer/src/acomp/L02/Project2/Project2.srcs/sim_1/new/SimulBranchControl.vhd:43]
ERROR: [VRFC 10-1504] unit behavioral ignored due to previous errors [/home/meurer/src/acomp/L02/Project2/Project2.srcs/sim_1/new/SimulBranchControl.vhd:8]
INFO: [VRFC 10-240] VHDL file /home/meurer/src/acomp/L02/Project2/Project2.srcs/sim_1/new/SimulBranchControl.vhd ignored due to errors

现在，根据我的理解，这意味着我的实体BranchControl和我在模拟中的组件具有不兼容的声明，但我不知道这是怎么回事，它们似乎正是和我一样。这是Vivado screenshot给我的错误。

为什么会这样？我做错了什么？

Answer 1

实例化中的组件映射是错误的方法;它应该是：

bc0: BranchControl port map (pl => ipl, bc => ibc, pc => ipc, ad => iad, flags => iflags);

VHDL实体端口与组件端口

1 个答案: