Mac，列出我的设备所连接的USB端口名称

Question

我目前需要弄清楚我的usb设备所连接的端口名称是什么。更具体地说，我需要知道要为以下内容添加什么

我使用的是Mac，我运行了命令行system_profiler SPUSBDataType，它给了我以下内容。 我感兴趣的设备是第二个：CP2102 USB转UART桥接控制器。但是如何确定该设备连接的串口？我的第一张照片需要它。

USB:

    USB 3.0 Bus:

      Host Controller Driver: AppleUSBXHCIWPT
      PCI Device ID: 0x9cb1 
      PCI Revision ID: 0x0003 
      PCI Vendor ID: 0x8086 

        Bluetooth USB Host Controller:

          Product ID: 0x8290
          Vendor ID: 0x05ac  (Apple Inc.)
          Version: 1.46
          Speed: Up to 12 Mb/sec
          Manufacturer: Broadcom Corp.
          Location ID: 0x14300000 / 2
          Current Available (mA): 500
          Current Required (mA): 0
          Extra Operating Current (mA): 0
          Built-In: Yes

        CP2102 USB to UART Bridge Controller:

          Product ID: 0xea60
          Vendor ID: 0x10c4  (Silicon Laboratories, Inc.)
          Version: 1.00
          Serial Number: 0001
          Speed: Up to 12 Mb/sec
          Manufacturer: Silicon Labs
          Location ID: 0x14200000 / 9
          Current Available (mA): 500
          Current Required (mA): 100
          Extra Operating Current (mA): 0

        Microsoft USB Optical Mouse:

          Product ID: 0x00cb
          Vendor ID: 0x045e  (Microsoft Corporation)
          Version: 1.00
          Speed: Up to 1.5 Mb/sec
          Manufacturer: PixArt
          Location ID: 0x14100000 / 4
          Current Available (mA): 500
          Current Required (mA): 100
          Extra Operating Current (mA): 0

更新：我运行了df命令，它给了我以下内容：

Filesystem    512-blocks     Used Available Capacity iused      ifree %iused  Mounted on
/dev/disk1     974716928 77014080 897190848     8%  754757 4294212522    0%   /
devfs                380      380         0   100%     660          0  100%   /dev
map -hosts             0        0         0   100%       0          0  100%   /net
map auto_home          0        0         0   100%       0          0  100%   /home
map -fstab             0        0         0   100%       0          0  100%   /Network/Servers
/dev/disk2s1      202248   198912      3336    99%      12 4294967267    0%   /Volumes/VirtualBox
/dev/disk3s1       81800    67720     14080    83%     121 4294967158    0%   /Volumes/Sublime Text
/dev/disk5s1     1228720   386824    841896    32%     370 4294966909    0%   /Volumes/Etcher

Answer 1

尝试在将设备插入USB之前和之后在终端中运行ls /dev/tty*。如果只有插入USB设备时才会出现该条目，那么该条目将是与设备对应的条目。