Question

我有一个小小的帮助，我尽可能多地完成研究，并且已经完成了我想做的事情。这是我的代码：

以下是模块代码：

Global con As New ADODB.Connection
Global NoRecords As Boolean

Public Enum rrCursorType
rrOpenDynamic = adOpenDynamic
rrOpenForwardOnly = adOpenForwardOnly
rrOpenKeyset = adOpenKeyset
rrOpenStatic = adOpenStatic
End Enum

Public Enum rrLockType
rrLockOptimistic = adLockOptimistic
rrLockReadOnly = adLockReadOnly
End Enum


Public Function OpenMyRecordset(rs As ADODB.Recordset, strSQL As String, Optional rrCursor As rrCursorType, Optional rrLock As rrLockType, Optional bolClientSide As Boolean) As ADODB.Recordset

If con.State = adStateClosed Then
    con.ConnectionString ="Driver= {SQLServer};Server=logistics.xxx.com;Database=ITM;Trusted_Connection=Yes;"
    con.Open
End If

Set rs = New ADODB.Recordset
With rs
    .ActiveConnection = con

    If bolClientSide Then
        .CursorLocation = adUseClient
    Else
        .CursorLocation = adUseServer
    End If

    .CursorType = IIf((rrCursor = 0), adOpenStatic, rrCursor)
    .LockType = IIf((rrLock = 0), adLockReadOnly, rrLock)
    .Open strSQL

    If .EOF And .BOF Then
        NoRecords = True
        Exit Function
    End If

End With

End Function

以下是表单上搜索按钮背后的完整代码：

Private Sub btnSearch_Click()

'UPC Search
If Me.chkUPCSearch = False Then

                strSQL = "SELECT DISTINCT[PO Master Data Table].[PO Nbr], [PO Master Data Table].UPC, [PO Master Data Table].[Item Description], " _
                & "[PO Master Data Table].[Vendor Style], [PO Master Data Table].COO, [PO Master Data Table].[Currency Type], [PO Master Data Table].Cost, " _
                & "[PO Master Data Table].[Assist $ Amount], [PO Master Data Table].[Supplier Name], [Vendor Table].[Manufacturer Name], " _
                & "[Vendor Table].[Manufacturer Address], [Master HTS Table].[HTS DESCRIPTION], [PO Master Data Table].[Order Qty], " _
                & "[PO Master Data Table].[Qty Recieved], [PO Master Data Table].[PO Comments], " _
                & "[Master HTS Table].[HTS 1], [Master HTS Table].[HTS 2], [Master HTS Table].[HTS 3], [Master HTS Table].[HTS 4], [Master HTS Table].[HTS 5], " _
                & "[Master HTS Table].[HTS 6], [Master HTS Table].[HTS 7], [Master HTS Table].[HTS 8], [Master HTS Table].[HTS 9], [Master HTS Table].[HTS 10], " _
                & "[Master HTS Table].[Canada HTS 1], [Master Shared Compliance Review].[SCR ID] " _
                & "FROM (([PO Master Data Table] LEFT JOIN [Master HTS Table] ON [PO Master Data Table].[Vendor Style] = [Master HTS Table].[Vendor Style]) " _
                & "LEFT JOIN [Master Shared Compliance Review] ON ([PO Master Data Table].UPC = [Master Shared Compliance Review].UPC) AND ([PO Master Data Table].[PO Nbr] = [Master Shared Compliance Review].[PO Number])) " _
                & "LEFT JOIN [Vendor Table] ON [PO Master Data Table].[Vendor Style] = [Vendor Table].[Vend Style] " _
                & "WHERE [PO Nbr] = '" & Me.txtSearch & "'"

OpenMyRecordset rstRSCH, strSQL

With rstRSCH
    If .RecordCount = 0 Then
        Answer = MsgBox("The record you are searching for does not exist. Please verify you have typed it in correctly! Do you need to create an SCR Record?", vbYesNo + vbQuestion, " ERROR!")

        If Answer = vbYes Then
            DoCmd.OpenForm "Manual SCR Entry - Record Search"
            Exit Sub
        End If

        If Answer = vbNo Then
            Me.Refresh
            Exit Sub
        End If

    Else
    .MoveNext
    .MovePrevious
        Me.txtPO.Value = rstRSCH("PO Nbr")
        Me.txtUPC.Value = rstRSCH("UPC")
        Me.txtItemDesc.Value = rstRSCH("Item Description")
        Me.txtStyleNbr.Value = rstRSCH("Vendor Style")
        Me.txtSuppNM.Value = rstRSCH("Supplier Name")
        Me.txtMFGNM.Value = rstRSCH("Manufacturer Name")
        Me.txtMFGAdd.Value = rstRSCH("Manufacturer Address")
        Me.txtHTSDESC.Value = rstRSCH("HTS Description")
        Me.txtSCRID.Value = rstRSCH("SCR ID")
        Me.txtQTY.Value = rstRSCH("Order Qty")
        Me.txtCost.Value = rstRSCH("Cost")
        Me.txtAssist.Value = rstRSCH("ASSIST $ AMOUNT")
        Me.txtCOO.Value = rstRSCH("COO")
        Me.txtHTS1.Value = rstRSCH("HTS 1")
        Me.txtHTS2.Value = rstRSCH("HTS 2")
        Me.txtHTS3.Value = rstRSCH("HTS 3")
        Me.txtHTS4.Value = rstRSCH("HTS 4")
        Me.txtHTS5.Value = rstRSCH("HTS 5")
        Me.txtHTS6.Value = rstRSCH("HTS 6")
        Me.txtHTS7.Value = rstRSCH("HTS 7")
        Me.txtHTS8.Value = rstRSCH("HTS 8")
        Me.txtHTS9.Value = rstRSCH("HTS 9")
        Me.txtHTS10.Value = rstRSCH("HTS 10")
        Me.txtCANHTS.Value = rstRSCH("Canada HTS 1")
    End If

End With

End If

Set rstRSCH = nothing`enter code here`

这是我需要帮助的地方。以上工作很好，它使用ADODB.connections并返回结果。但是如果我搜索PO XYZ ，我知道它有两条与之关联的行/记录;它只显示表格中的记录 1 of 1 。如何让唱片选择器分别显示 1 of 2 或 2 of 2 ？

我开始走下.movenext，.moveprevious，方法的道路，但后来我感到困惑。任何帮助将不胜感激。

上面的代码严重愚蠢到只是把这个想法推回家。它确实调用了一个名为OpenMyRecordset的函数，因此大部分连接信息都在那里。

Answer 1

您可以使用Gdx.input.setInputProcessor(new InputAdapter() { public boolean touchDragged(int screenX, int screenY, int pointer) { body.setTransform(screenX, Gdx.graphics.getHeight() - screenY, 0); return true; } });然后.MoveLast完全初始化记录集，只要它包含记录：

.MoveFirst

请注意，在大型记录集上，这可能会让您失去一些性能。

如何使用ADODB

1 个答案: