我正在尝试向PC添加路由以访问触摸屏的VNC服务器（以控制特定计算机）。
触摸屏的IP地址为192.168.1.20，子网掩码为255.255.255.0 机器有2个以太网端口，第一个具有IP地址192.168.3.10，第二个具有IP地址192.168.1.1。两者都有子网掩码255.255.255.0
根据机器制造商的说法，如果我将路由添加到Windows pc上并且他给了我以下链接，则应该可以到达触摸屏： https://www.howtogeek.com/howto/windows/adding-a-tcpip-route-to-the-windows-routing-table/
如果我键入“ route add 192.168.1.1 mask 255.255.255.0 192.168.3.10”，然后按Enter键，我将得到答复“ route add failed参数错误”
如果我输入“” route -p，添加192.168.1.1掩码255.255.255.0 192.168.3.10”，然后按Enter键，我将收到回复“确定！”
如果我随后重新启动PC并尝试跟踪路由，它将使用我的默认网关而不是我添加的路由。
该路由也不在活动路由列表中。我有点迷路了，有人有主意吗？
谢谢！
下面是命令提示符下的文本：
C:\Windows\system32>route add 192.168.1.1 mask 255.255.255.0 192.168.3.10
The route addition failed: De parameter is onjuist.
C:\Windows\system32>route -p add 192.168.1.1 mask 255.255.255.0 192.168.3.10
OK!
C:\Windows\system32>route print
===========================================================================
Interface List
15...04 d9 f5 d2 58 49 ......Realtek Gaming GbE Family Controller
9...00 ff 7a 85 69 ee ......TAP-Windows Adapter V9
4...40 74 e0 79 5a 2d ......Microsoft Wi-Fi Direct Virtual Adapter
2...42 74 e0 79 5a 2c ......Microsoft Wi-Fi Direct Virtual Adapter #2
8...40 74 e0 79 5a 2c ......Intel(R) Wireless-AC 9260 160MHz
6...40 74 e0 79 5a 30 ......Bluetooth Device (Personal Area Network)
1...........................Software Loopback Interface 1
===========================================================================
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.3.1 192.168.3.104 50
127.0.0.0 255.0.0.0 On-link 127.0.0.1 331
127.0.0.1 255.255.255.255 On-link 127.0.0.1 331
127.255.255.255 255.255.255.255 On-link 127.0.0.1 331
192.168.3.0 255.255.255.0 On-link 192.168.3.104 306
192.168.3.104 255.255.255.255 On-link 192.168.3.104 306
192.168.3.255 255.255.255.255 On-link 192.168.3.104 306
224.0.0.0 240.0.0.0 On-link 127.0.0.1 331
224.0.0.0 240.0.0.0 On-link 192.168.3.104 306
255.255.255.255 255.255.255.255 On-link 127.0.0.1 331
255.255.255.255 255.255.255.255 On-link 192.168.3.104 306
===========================================================================
Persistent Routes:
Network Address Netmask Gateway Address Metric
192.168.1.1 255.255.255.0 192.168.3.10 1
===========================================================================
IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination Gateway
1 331 ::1/128 On-link
8 306 fe80::/64 On-link
8 306 fe80::532:bb65:7a1a:7b56/128
On-link
1 331 ff00::/8 On-link
8 306 ff00::/8 On-link
===========================================================================
Persistent Routes:
None
C:\Windows\system32>tracert 192.168.1.1
Tracing route to 192.168.1.1 over a maximum of 30 hops
1 <1 ms <1 ms <1 ms 192.168.3.1
2 * * * Request timed out.
3 * * * Request timed out.
4 * * * Request timed out.
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Trace complete.
C:\Windows\system32>